Elastomeric wall putty is a single-component waterproof coating, in addition to features with a water-based primer, but also has very good moisture, mildew, water resistance and anti-aging functions. Scraping for interior and exterior of the leveling and sealing, but also to resolve due to various factors wall shrinkage cracks, the film automatically to fill the wall extension properties have been or will produce minor cracks to ensure the finish is not cracking, greatly extend the paint life. 
 Product properties: 
 Ingredients: modified acrylic resin filler 
 Appearance: milky 
 Consumption of paint: the thickness of the theoretical value -0.4-0.8 m 2 / kg 
 (Actual consumption of paint due to construction methods, surface dryness, roughness, construction environment and the need to select the case of the coating film thickness 
 Ring, there will be quite different.) 
 Drying time: dry about 2 hours / 25 ℃ 
 Recoat Time: 2 hours 25 ℃ 
 (Drying time will be different with the ambient temperature and humidity changes.) 
 Solid content: 72% 
 Wear washable: Excellent 
 Chemical resistance: the general ability of air pollutants. 
 Durability: Excellent 
 Scope: 
 For noble houses, villas, apartments, etc. within the external wall putty can also be used to decorate the wall of the facade; can be used for most of the approved building the base surface 
 Putty, such as: concrete, soft concrete, gypsum board, cement board, cement, sand, paste and so on. 
 Note: 
 The construction of the base surface as the wall or peeling paint, from the shell, oil and other phenomena, be sure to clean, such as a powder base surface, the first closure 
 End. 
 Be sure to use the grant award during the construction knife embedded uniform, the general base surface such as the need for two batches, the second coat dry to the case of the former deep below the road 
 To construction. 
 Construction temperature: 5 ℃ -40 ℃, humidity no special requirements. 
 Tools: paint brushes, roller 
 Dilution: You must use water dilute the amount of control: a closed paint with 0.5 parts water. 
 Dry film thickness: 30 microns (each) 
 Storage: Store at 0-35 ℃, cool, clean, dry place, the remaining paint should be covered container, impurities can cause paint deterioration, 
 If you do not open the product should be properly maintained. 
 Technical parameters: 
 PH value :8.0-9 .0 polluting: environmental protection 
 Viscosity: 140ku (30 ℃) Elongation: 300% 
 Solid content: 72% of the water-alkali: Good 
 Construction of: Scraping and accessible surface drying time: 6h 
 Theory of consumption: 0.8kg / ㎡ storage period: 12 months unopened 
 Packing: 18L (drums)